


The fiber laser ECO can be equipped with “IPG” 1000W, 2000W or 3000W resonators
By this type of laser there are no mirrors and no optical elements in the way of the laser beam. By fiber-optic cable it is being transported to the work area without losses, i.e. the power losses are ZERO
The metal cutter uses “NUKON NLCH”, which is easy for operation and maintenance.
The metal laser cutting machine has very low power consumption. Total consumption is 7kW.
Loading and unloading of machined parts is carried out by a pallet changer table with hydraulic height adaption during the cutting process – retrofitting with additional automation functions is possible.
System to illuminate the work area is part of the standard equipment.
The working area is provided with a full enclosure and the cutting process can be observed via a special-glass window.
Cutting Capability



Cutting head
The cutting head of the metal cutter achieves best results in 2D cutting. It is a cutting head especially developed for fiber lasers. It provides cutting edges with defined quality.
- High efficiency in continuous cutting
- Vertical Z-axis movement up to 30 m / min
- High horizontal acceleration up to 4g
- The optical system is sufficient up to 10 kW
- Contamination and temperature control in all optics
- Feature to minimize optical breaks
- Piercing sensor control
- Collimator and lens water cooling feature
- Lens and Collimator replacement feature at the customer’s site
- Automatic optical calibration system
- Height detection control under 1msec
- Monitoring the temperature of the optics with the online user interface
- LEDs that indicate the state of components and functions of the cutting head
- Focus positioning with motor (Auto focus)
- Reinforced mechanical design with aluminum body
- Monitoring of all optical components and communication of process signals with CNC
- Ability to perform cutting control through digital communication with integrated EtherCAT
- Integrated gas pressure sensor
- Gas guide system
- Piercing and reflection sensor
Resonator
Fiber laser – the big innovation of today’s technology, with exceptional reliability and
high beam quality, has many advantages:
- High output power
- High quality of laser beam
- Less focus larger working distance
- Over 30% coefficient of efficiency
- Modular design „connect and start“
- Compact, solid and easy to install
- Low operation costs
- Flexible and durable fiber optic cable
- High electrical efficiency
- Lifespan of the diodes over 100,000 hours
- Low requirements for cooling
RADAN CAD/CAM system for programming
[wc_toggle title=”RADPROFIL Cut – RADAN” layout=”box”]
Nukon Fiber Laser uses software Radprofile Cut Cad / Cam with its own postprocessor.
For ease of cutting it has many features like auto nesting and machining, calculating time, micro-joint, total cut and more.
All data for cutting are being installed in technological Radan charts. This program is designed for nesting and machining and is installed directly on the CNC without any adjustment of the cutting parameters.
Radan has some additional features, if it is unable to cut a hole smaller than
(0.5mm by the thickness of the material), it will be marked automatically.
Radan is a fast, modern programming application designed to assist in transferring data from CAD to NC code.
Easy programming
1.Preparing normal cutting
2.Cutting with pre-piercing
3.Sheet metal clearances
4.Clearances between parts
5.Preparing common cut
6.Edit cutting speeds
7.Adding new material to the list
8.Using remnant option (saving excess parts of the sheet)
9.Marking
10.Giving radius at the corners
11.Modifiying corners as 90 degrees
12.Defining cutting technology (cut1, cut2)
13.Giving micro joint for nested parts
14.Changing the length of the entrance properties
15.Preporting writings with marking property
16.Change of cutting direction
17.Scaling dimensioning
18.Combining the intermittent lines
19.Film burning for covered staintless steel
20.Cut 1 , Cut 2 , Cut 3 ,Cut 4 Ve Small Hole property changing
21.Edge clearances of the unit sheet
22.Editing the automatic machining option
23.Marking speed
24.Defining cutting direction while doing automatic contour
25.Adjusting of sheet remnant
26.No cutting
27.Change radius
[/wc_toggle]
Subject | Features | |||||
Machine Model | ECO S-Line PRO | |||||
Type | Flying Optic Head | |||||
Cutting Head | Auto-Focus | Manual Focused Head | ||||
Sheet Dimension | 5′ х 10′ / 1530 х 3050mm / 60″ х 120″ | |||||
Resonator (IPG) | 1000W | 2000W | 3000W | |||
Faber Laser Diameter | 50µm/002″ | 100µm/004″ | 100µm/004″ | |||
Maximum Cutting capacity | Mild Steel | 8mm/0.32″ | 16mm/0.47″ | 18mm/.709″ | ||
Stainless Steel | 4mm/0.15″ | 6mm/0.23″ | 10mm/.394″ | |||
Aluminium | 3mm/0.11″ | 5mm/0.15″ | 8mm/.315″ | |||
Brass | 2mm/0.07″ | 3mm/0.11″ | 5mm/.197″ | |||
Copper | 2mm/0.07″ | 3mm/0.11″ | 5mm/.197″ | |||
Power Supply Consumption 460V/3PH (Avialable in 220V/3PH) | 18 kW | 21 kW | 26 kW | |||
Working Table Height | 32,2′ / 820mm | |||||
Maximum Loading Capacity | 1000 kg | |||||
Axis | X-Axis | 5′ / 1530mm / 60″ | ||||
Y-Axis | 10′ / 3050mm / 120″ | |||||
Z-Axis | 9.8″ / 250mm | |||||
Axis movement | 4 Axis Digital Motor System | |||||
Positioning System | Rack and Pinion (Servo Motor) | |||||
Acceleration Speeds (G) | 1G | |||||
Axis Speed (X,Y Traverce Speed) | 105m/min | |||||
Additional Power Consumption | 0 kWh | |||||
Positioning Accuracy | ± .002″ / .05mm | |||||
Repeatability | ± .0007″ / 0.02mm | |||||
Z-Axis | No touch type, Z axis tracing type | |||||
Shuttle Table Change Time | 16sec | |||||
Illumination | 2 pieces, Type: Fluorescent | |||||
Controller | 19″ TFT Touch Screen, Ethernet Enabled | |||||
Assist Gas Choosing control | Oxygen: 10 Bar Nitrogen: 30 Bar Air : 30 Bar |
|||||
Presure adjustment values: 7,25-87 PSI; | ||||||
Provided pressure: 116 PSI | ||||||
Machine Weight | 10.000 kg/23.980 lb |